textile Functional tester

Product description

The Dentistry Base Polymer Search Stability tester is an instrument used to evaluate the color stability of dental base polymers under different environmental conditions. A base polymer is a material used for dental restoration and correction, such as dentures, braces, dentures, etc.

Due to long-term use and the influence of the external environment, these base polymers may undergo color changes, affecting their beauty and durability. The color stability tester evaluates the color change of the base polymer under these conditions by simulating different environmental conditions, such as light, temperature, humidity, etc. Testers usually use standardized test methods and parameters to ensure the accuracy and comparability of test results.

During the test, a sample of the base polymer is placed in a tester and exposed to predetermined environmental conditions. The tester records the initial color of the sample and re-measures the color of the sample after a certain interval. The color stability of the base polymer can be assessed by comparing the initial color with the color of subsequent measurements.

The use of this tester can help dentists and technicians to select polymer materials with better color stability, thereby improving the effectiveness and durability of repairs and corrections. At the same time, manufacturers can use this tester to evaluate and improve the color stability performance of their products.

Enforce standards

YY0270.1-2011 and YY/T0631-2008.

Technical parameter

Control system :PLC;

Operation interface: color touch screen, Chinese and English switch;

Light source: illuminance is 150 0001X—– accuracy is not biased to 10%;

Color temperature range :5000K-10000K;

Filter: transmittance greater than 90%;

Test box: Water temperature 0-99 degrees, test temperature 37 degrees,

water temperature can be adjusted with temperature display;

Clip :304 stainless steel clip outer diameter 50MM, thickness 0.5MM;

Polyurethane film: thickness of 50UM– 0.5MM;

The device comes with a dial indicator :0-25.5MM, fine 0.01MM;

Standard :15L constant temperature tank, temperature 0-99 degrees.