Geomembrane Tester

A Geotextile Wear Tester is an instrument specifically designed to measure the abrasion resistance of geotextiles and related products.

Geotextiles, used extensively in civil engineering for separation, filtration, reinforcement, and drainage, are often subjected to abrasive forces during installation (e.g., compaction of aggregate) and throughout their service life. This tester simulates these wear conditions by rubbing a geotextile specimen against a specified abrasive material under controlled pressure and action.

Scope of application:

The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the experiment, the sample is mounted on a fixed platform and rubbed with an abrasive with specified surface properties. Under the condition of controlling the pressure and friction action, the abrasive moves in a straight line along the horizontal axis. Wear resistance is expressed as the percentage loss of tensile strength of the specimen before and after friction.

Meet the standard:

GB/T 17636-1998.1S0 13427-1998.etc

Instrument features:

Applicable to textiles and related products:

Stainless steel structure, durable;

Special fixture design, easy to install the sample, to avoid the sample slipping during the test;

Friction cycle can be set:

Easy to install and operate.

Technical parameters:

Effective friction area 50x200mm 75x200mm

Reciprocating frequency 90 reciprocating times/min 10——115 reciprocating times/min

Reciprocating stroke 25±1mm 25±1mm

Load 6+0.01kg 1±0.01kg

Count range 1 to 9999 cycles configurable

Power supply AC 220V 50Hz

Standard configuration:

1. One host

2. One counterweight

3. Five pieces of dry abrasive cloth

4. Product packing list 1 copy

5. 1 copy of product manual

6. One copy of product certificate