Horizontal & Vertical Burning Tester
Category：Flammability Tester
Introduction
The Horizontal & Vertical Burning Tester is a high-precision laboratory instrument designed to evaluate the combustion performance of plastics and non-metallic materials under horizontal and vertical flame conditions. It is widely used in research, quality control, and industrial testing to assess flame retardancy, safety, and compliance.
Equipped with a PLC-controlled touchscreen interface, this tester automates ignition, flame application, timing, and data recording. It ensures accurate, repeatable, and efficient testing while reducing human error. The device also features adjustable flame height, temperature, and gas flow, making it suitable for a wide range of materials and testing scenarios.
Applications
The Horizontal & Vertical Burning Tester is ideal for:
Plastics and Rubber Industry: Assessing flame retardancy of plastic components, rubber sheets, and non-metallic composites.
Electronics and Electrical Equipment: Testing housings, panels, and insulation materials for UL, IEC, and GJB compliance.
Consumer Products: Evaluating materials used in furniture, toys, household appliances, and automotive interiors.
Research & Development: Material testing in universities, laboratories, and R&D departments.
Quality Control: Ensuring production materials meet fire safety standards before market release.
Standards
The tester meets international and national fire testing standards, including:
GB/T 2408-2008: Plastics – Horizontal and vertical burning methods
ANSI/UL94-2006: Standard for flammability of plastic materials
GB/T 10707-2008 / GB/T 13488: Rubber combustion performance – Vertical burning method
GJB360B-2009: Electronic and electrical components testing
GB/T 5169.16-2008
IEC 60950-1: Safety of information technology equipment
Product Parameters
| Parameter | Specification |
|---|---|
| Ambient Temperature | Room temperature – 40°C |
| Relative Humidity | ≤75% |
| Power Supply | 220V ±10%, 50Hz, 150W |
| Flame Tube Inner Diameter | 9.5 mm ±0.5 mm |
| Timer Range | 0–999.9 s |
| Flame Application Time | 0–999.9 s (adjustable) |
| After-Flame Time | 0–999.9 s |
| After-Glow Time | 0–999.9 s |
| Combustion Angle | 0°, 20°, 45° selectable |
| Flame Height | 20–130 mm (adjustable) |
| Flame Temperature | 100–1000°C (adjustable) |
| Gas Flow Rate | 0–1000 ml/min (adjustable) |
| Test Chamber Volume | >0.5 m³ (customizable up to 1 m³) |
| Dimensions | 1160 × 600 × 1310 mm (W×D×H) |
| Net Weight | ~100 kg |
| Optional Features | Flame calibration device, gas leak alarm, anti-backflow ventilation system |
FAQ
Q1: What types of materials can be tested?
A1: Plastics, rubber, non-metallic composites, and electrical insulation materials.
Q2: Which standards does this tester comply with?
A2: GB/T 2408-2008, ANSI/UL94-2006, GB/T 10707-2008, GJB360B-2009, GB/T 5169.16-2008, IEC 60950-1.
Q3: Can the flame height, temperature, and gas flow be adjusted?
A3: Yes, all parameters are fully adjustable to meet various testing protocols.
Q4: How does automation improve testing efficiency?
A4: The PLC-controlled touchscreen automates ignition, flame application, timing, and data recording, ensuring repeatable and accurate results.
Q5: Is the device safe for lab operators?
A5: Yes, with automatic flame retraction, optional gas cutoff, anti-backflow ventilation, and optional gas leak alarms, the tester ensures operator safety.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of manufacturing & export experience, a partner you can trust.
