Plastic Biodegradation Testing System
Category：Other
Introduction
The Plastic Biodegradation Testing System is a laboratory system used to evaluate the ultimate aerobic biodegradation performance and disintegration behavior of plastic materials under controlled composting conditions. By continuously measuring the carbon dioxide released during aerobic biodegradation, you can accurately determine the biodegradation percentage and material disintegration performance.
Application
You use this system to assess the biodegradability of plastic and bio-based materials under controlled composting environments.
It is suitable for testing biodegradable plastics, compostable plastics, bio-based polymer materials, packaging materials, agricultural films, shopping bags, polyester-based biodegradable plastics, and other polymer products intended for composting or environmental degradation evaluation.
Standards
The Plastic Biodegradation Testing System complies with and supports testing according to the following standards:
(1) GB/T 19277.1-2011 Determination of the ultimate aerobic biodegradability of materials under controlled composting conditions – Method by analysis of released carbon dioxide – Part 1: General method
(2) GB/T 19277.2-2013 Determination of the ultimate aerobic biodegradability of materials under controlled composting conditions – Method by analysis of released carbon dioxide – Part 2: Gravimetric determination of carbon dioxide released under laboratory conditions
(3) GB/T 19811-2005 Determination of the degree of disintegration of plastic materials under defined composting conditions
(4) ISO 16929:2021 Plastics – Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
(5) GB/T 29649-2013 Determination of bio-based content in bio-based materials – Liquid scintillation counting method
(6) GB/T 33797-2017 Determination of the ultimate anaerobic biodegradability of plastics under high-solids composting conditions by analysis of released biogas
(7) GB/T 22047-2008 Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring oxygen demand or released carbon dioxide
(8) GB/T 20197-2006 Degradable plastics – Definition, classification, marking and degradability requirements
(9) GB/T 32163.2-2015 Ecodesign product assessment specification – Part 2: Degradable plastics
(10) GB/T 16716.7-2012 Packaging and packaging waste – Part 7: Biodegradation and composting
(11) GB/T 38082-2019 Biodegradable plastic shopping bags
(12) GB/T 29646-2013 Modified polyester biodegradable plastics for blow molding films
(13) GB/T 32366-2015 Biodegradable poly(butylene adipate-co-terephthalate) (PBAT)
(14) GB/T 33798-2017 Biodegradable polyester roll bags
(15) GB/T 35795-2017 Fully biodegradable agricultural mulch films
Parameters
| Item | Description |
|---|---|
| Test Method | Aerobic composting biodegradation |
| Composting Mode | Static composting vessel |
| Measured Indicator | Carbon dioxide (CO₂) release |
| Evaluation Results | Biodegradation percentage, disintegration degree |
| Test Environment | Controlled temperature, oxygen concentration, and humidity |
| Carbon Source Analysis | Total Organic Carbon (TOC) |
| Monitoring Method | Continuous monitoring and periodic measurement |
| Blank Control | Blank composting vessel included |
Features
You can determine the ultimate aerobic biodegradation capability of plastic materials through precise CO₂ monitoring.
The system simulates controlled composting conditions with regulated temperature, oxygen, and humidity.
Biodegradation percentage is calculated by comparing actual CO₂ release with theoretical CO₂ based on TOC.
The system allows evaluation of both biodegradation performance and material disintegration at the end of the test.
It supports reliable comparison between test samples and blank controls.
Accessories
(1) Static composting vessels
(2) Carbon dioxide collection and measurement units
(3) Temperature and humidity control components
(4) Oxygen concentration control components
(5) Sample mixing and inoculation tools
FAQ
1.What is this product?
This product is a Plastic Biodegradation Testing System used to evaluate aerobic biodegradation under composting conditions.
2.What is this product used for?
You use it to determine biodegradation percentage, carbon dioxide release, and disintegration performance of plastic materials.
3.What is the working principle of this product?
It measures the carbon dioxide released during aerobic composting and compares it with theoretical CO₂ based on total organic carbon.
4.Why is this product important?
It provides scientific and standardized evidence for biodegradability claims and regulatory compliance.
5.What industries is this product suitable for?
It is suitable for biodegradable plastics manufacturers, packaging producers, material research institutes, and environmental testing laboratories.
