Test System for testing tightness and leackage for a high diversity of components and devices
Category：Filter Cartridge Filtration Tester
Introduction
Test System for testing tightness and leackage for a high diversity of components and devices. With Leak Test Systems of series it is possible to test tightness against over and low-pressure of components of different dimensions and shapes. The leak rate is determined depending on pressure.
The test rig is working at test air temperatures from -40°C up to 120°C. A heat exchanger protects the measurement instrumentation against damages because of too low or high temperatures during low pressure operation. For external connection the test rig has a test air adapter, a pressure measurement port as well as a temperature sensor which have to be connected with the test sample. All connecting lines are 2 m long so that the sample can be in a climatic chamber during the test.
Applications
tightness and leak testing of technical components and devices
Benefits
test pressure is measured directly at test sample
tests with over and low-pressure possible (pressure and suction mode)
wide temperature range of applicable test air
by means of cascading of several laminar flow elements wide volume flow range
compact design
mobile – easy to move by lockable weels
easy handling supported by computer-controlled test procedure
easy handling supported by computer-controlled test procedure
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | L/min | 0.005 … 300 (during operation) |
| Test pressure | kPa | – (0.1 … 90); + (0.1 … 500) |
| Operating medium (gas/air) | – | Dry, particle-free compressed air |
| Compressed air supply | bar | max. 8 (max. 600 L/min) |
| Power supply | – | 230 VAC |
| Environmental condition, temperature | °C | -40 … 120 |
| Power consumption | W | approx. 500 |
| System dimensions (W × H × D) | mm | 2000 × 1100 × 900 |
| Weight | kg | approx. 280 |
