Aerospace Wire Abrasion Tester
Category：Interior Material Tester
Introduction
The Aerospace Wire Abrasion Tester is designed to evaluate the abrasion resistance of wires and cables used in aviation and aerospace applications. It simulates mechanical wear conditions under controlled loading and movement, ensuring that insulation and outer sheath materials meet strict durability requirements. The instrument provides accurate control over belt speed, abrasion angle, and applied load, delivering repeatable and standardized test results.
Application
This tester is suitable for:
Aviation and aerospace wires and cables requiring mechanical durability verification
Aircraft wiring harnesses used in high-vibration environments
Satellite and spacecraft cable systems for insulation integrity testing
R&D and quality control laboratories developing high-performance wire insulation materials
Certification and compliance testing for aerospace industry standards
Standards
The instrument complies with international and military standards:
(1) GJB 17.9 — Aerospace wire and cable test methods
(2) MIL-W-81381A — Military specification for aircraft wire
(3) MIL-T-5438 — Military test procedures for electrical insulation
(4) ISO R1220 — Determination of wire insulation abrasion resistance
(5) ISO 1491 — Test methods for resistance to mechanical stress in wires and cables
Parameters
| Item | Specification |
|---|---|
| Sand belt length counter | 0–9999.9 mm |
| Sand belt travel speed | 1500 mm/min |
| Abrasion support radius | F: 0.8 / 1.6 / 4.8 mm; G: 0.4 / 0.8 / 1.6 mm |
| Applied load | 54 ± 0.5 g |
| Sand belt and sample angle | 29° |
| Conductive strip width | 6.5 mm |
| Distance between conductive strips | 76 ± 2 mm |
| Sand belt width | 25 ± 0.5 mm |
| Sand belt grit | 400# aluminum oxide |
| Sand belt length | 50 m |
| Test voltage / Power supply | 220 V / 50 Hz |
Features
Precise abrasion control: Belt speed and angle can be accurately set for consistent testing.
Adjustable load: Supports multiple standard weights to simulate different abrasion pressures.
High repeatability: Counter measures belt travel distance to monitor and reproduce wear cycles.
Standardized test setup: Supports compliance with both military and ISO aerospace wire testing standards.
Durable construction: Designed for continuous operation in lab and production environments.
Accessories
(1) Sand belts (400# aluminum oxide)
(2) Conductive strips for monitoring wear
(3) Standard load weights
(4) Sample clamps and holders
(5) User manual and calibration tools
FAQ
What is this product?
A tester for evaluating the abrasion resistance of aerospace and aviation wires.
What is it used for?
Determines the durability of wire insulation and outer sheath under mechanical wear conditions.
Why is it important?
Ensures wires can withstand the harsh mechanical stresses encountered in aviation and aerospace applications.
Which industries use this product?
Aerospace, aviation, satellite systems, wire and cable manufacturing, and quality assurance laboratories.
What types are available?
Models with different sand belt widths, lengths, load configurations, and adjustable abrasion angles.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of manufacturing & export experience, a partner you can trust.
