Automotive Axle Shaft Torsion Testing Machine
Category：Torsion Testing Machine
Introduction
The Automotive Axle Shaft Torsion Testing Machine is mainly used for static torsional mechanical performance testing of various automotive axle shafts. It can determine technical parameters including qualified torque, failure torque, yield torque, maximum torque, torsional strength, and torsion angle.
The machine can generate torque-torsion angle, torque-time, and torsion angle-time test curves and can print test data reports.
Application
The Automotive Axle Shaft Torsion Testing Machine is mainly used for:
(1) Automotive axle shaft static torsion testing
(2) Qualified torque testing
(3) Failure torque testing
(4) Yield torque testing
(5) Maximum torque testing
(6) Torsional strength and torsion angle testing
Standards
GB/T 2611 — General Requirements for Testing Machines
Parameters
| Parameter | Specification |
|---|---|
| Maximum Test Torque | 100, 200, 500, 1000, 2000, 5000, 10000 N·m |
| Test Travel | 300 / 500 mm |
| Testing Machine Class | Class 0.5 |
| Torque Measurement Range | 1%–100% FS |
| Torque Minimum Resolution | 0.01 / 0.1 N·m |
| Angle Resolution | 0.01° |
| Maximum Torsion Angle | 0–Unlimited |
| Test Speed | 0.1–720°/min, customizable |
| Angle Indication Error | < ±0.5% |
| Angle Repeatability Error | < 0.5% |
| Test Force Indication Error | < ±0.5% |
| Test Force Repeatability Error | < 0.5% |
| Test Speed Accuracy | Better than ±1% of indicated value |
| Appearance | Complies with GB/T 2611 requirements |
| Torque Loading Direction | Both directions |
| Torsion Fixtures | Standard set |
| Power Supply | 220 V, 50 Hz |
| Applicable Products | Automotive axle shafts |
Features
(1) Static Torsion Testing – Designed for static torsional mechanical performance testing of automotive axle shafts.
(2) Multiple Torque Parameters – Can determine qualified torque, failure torque, yield torque, and maximum torque.
(3) Torsional Performance Evaluation – Supports testing of torsional strength and torsion angle.
(4) Test Curve Generation – Can generate torque-torsion angle, torque-time, and torsion angle-time curves.
(5) Test Report Printing – Test data reports can be printed after testing.
(6) Bidirectional Torque Loading – Supports torque loading in both directions.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of manufacturing & export experience, a partner you can trust.
