Static Load Testing Machine
Category：Static & Dynamic Load
Introduction
The Static Load Testing Machine is designed for static tensile load evaluation of seats and seat-related components. The system provides a maximum load capacity of 10,000 lbf and is constructed with an extruded aluminum protective frame, incorporating tinned steel wire or clean polycarbonate safety panels. All access doors are equipped with electrical safety interlock systems to ensure operator protection during testing.
The machine is hydraulically driven and configured for stable static load application, making it suitable for safety performance verification and structural strength assessment of automotive seating systems and accessories.
Application
The Static Load Testing Machine is used for static tensile strength and load-holding performance evaluation of the following test products:
Automotive seats and seat frames
Seat tracks and mounting brackets
Seat belts and seat anchorage components
Seat adjustment mechanisms and structural accessories
The large specimen mounting area allows integration with a three-station automatic workbench, supporting multi-point testing and improving testing efficiency in automotive safety laboratories and manufacturing facilities.
Standards
The Static Load Testing Machine is designed with reference to the following international standards and testing practices:
(1) FMVSS 207 – Seating Systems
(2) FMVSS 210 – Seat Belt Assembly Anchorages
(3) ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons — Wheelchair Tie-Down and Occupant Restraint Systems
(4) ISO 6549 – Road Vehicles — Procedure for H-Point Determination
(5) SAE J879 – Motor Vehicle Seat Systems
(6) GB 15083 – Motor Vehicle Seats, Seat Anchorages, and Head Restraints — Strength Requirements
Parameters
| Parameter | Specification |
|---|---|
| Maximum load capacity | 10,000 lbf |
| Drive mode | Hydraulic |
| Cylinder stroke | 18 in |
| Cylinder type | U-shaped hydraulic cylinder |
| Piston rod diameter | 1 in |
| Load measurement | 10,000 lbf load cell |
| Load application mode | Static |
| Height adjustment | Manual |
| Base plate | 4 in × 6 in T-slot steel base |
| Safety protection | Interlocked safety doors |
| Power supply | 120 VAC |
| Hydraulic unit | Integrated power pack with oil reservoir |
| Surface treatment | Powder-coated (black as standard) |
Accessories
(1) Static load testing main frame
(2) Hydraulic power unit with integrated oil reservoir
(3) 10,000 lbf load cell with quick-release chain attachment
(4) Manual hydraulic control valve
(5) Digital peak-hold load indicator
(6) Safety enclosure with interlock system
(7) Operation and maintenance manual
FAQ
1. What is this product?
It is a hydraulic static load testing machine used for tensile strength evaluation of seats and seat components.
2. What is it used for?
It applies controlled static loads to assess structural integrity and safety performance.
3. Why is this test important?
Static load testing verifies compliance with automotive safety standards and prevents structural failure during use.
4. Which industries is it suitable for?
Automotive manufacturing, component suppliers, testing laboratories, and safety certification bodies.
5. What types of tests can be performed?
Static tensile load tests on seats, seat frames, anchorages, and related structural components.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of manufacturing & export experience, a partner you can trust.
